F.A.Q.

A briquette is the compressed block made from agricultural and other types of waste kindling to start a fire.

The machine that converts waste to cash that is it converts the waste in to small blocks known as briquettes.

• Briquettes are cheaper than coal and other fossil fuels.
• Oil, coal, lignite, once used cannot be replaced but briquettes are renewable.
• There is no sulfur in Briquettes and no carbon is released.
• There is no fly ash while burning briquettes.
• Briquettes when subjected to heat don’t produce any spark whereas solid raw material produces spark and also releases smoke.
• It burn 3 times more comparing to charcoal.
• It is cheap and easy to make and provides an opportunity to villagers to earn money from residual farm items.
• The major advantage of using briquettes is its quality of sustaining a good and friendly environment.

The main raw material used for making briquettes are rice husk, cotton stalk, coffee husk, sugarcane bagasse, wood charcoal, forestry leaves, wax, almond shells, lignite oil, paddy stalks, tea waste, Groundnut shells, wheat waste etc.

• Biomass Briquettes
• Sawdust Briquettes
• Agro waste Briquettes
• Wood Briquettes

Briquettes are 100% ecofriendly and do not create pollution.

Calorific values of briquettes range between 3200 to 4000 k but it depends on quality of raw material.

• Ceramic industries
• Milk plant industries
• Food processing industries
• Textile industries
• Rubber industries
• Industries using thermal application

• Super-60 model
• Supreme-70 model
• Power making unit
• Jumbo briquetting 9050
• Crusher cum shredder

• It is a renewable energy
• Effective use of waste by recycling the waste.
• It is ecofriendly, saves environment, save forests.
• Reduction in emission of carbon.
• It gives employment to rural people.
• Can be established anywhere.
• Demanded highly and ready markets.
• Highly profitable.
• Reduction in bills of petroleum products saving FOREX.
• Increasing the income of farmers from the sale of argo waste.
• Also stops the migration of rural people to rural area.

The briquetting machine can work non-stop for 10 hours.

The shape of finished briquettes is with 90 mm diameter and length is approximately 1 ft and it can be customized as per requirement of client.

The suitable moisture range is of 8-13% for briquetting press.

The raw material should be should be smaller than 3mm.

The calorific value of the different type of briquettes solely depends on type of raw material used for making it. But, the variation of the calorific value varies somewhat around 4000 Kcal/Kg, which is an excellent alternative to the limited resources like fire, wood, steam coal and lignite. Here is the list of calorific value of different kind of briquettes made from varied raw material.

You can use the available testing equipment with compressing pressure up to 70000-720000 psi for testing the sustainability for briquetting. The equipment also allows us to design a custom processing system for any operation.

Average power consumption of briquetting plant- jumbo 90 is around 40 to 45 units/MT at continuous running.

Briquetting Plant requires connected load of 90HP but consumption load is of 75HP.

Our briquetting plant and briquetting products are very efficient and based on the most contemporary technology and it is very lucrative, they are available at very affordable rates.

1. As a substitute fuel to coal and petroleum.
2. Substitute to boiler fuel

Yes, briquettes size and shape is customisable according to your specific needs.

The main purpose of briquetting is to replace fossil fuel as it is a green energy. Briquettes can replace following conventional fuels that are used in mass quantities:

• Diesel
• Kerosene
• Furnace Oil
• Lignite
• Coal
• Firewood

The ash content remained in briquetting plant is low as 2% to 5 % and very low compared to coal. Ash content in coal is 20% to 22%.

The suitable land requirement setting up Briquetting plant requires machine room size 25 ft. * 30 Ft. with the height of 12 Ft. and for procuring raw material 1 acre land.

It requires approx. 25 to 30 minutes to change the maintenance parts of the plant and your operator can easily change the maintenance parts once the person is trained.

Briquettes should be stored in a dry and a ventilated room separated from humidity influence like rain and snow.

Straw briquettes should be burnt in ceramic stoves, Culm stoves, kitchen stoves, fireplaces, biomass stoves, central heating boilers – standard ones and those equipped with automatic feeders.

Through the excessive pressure, the briquette is shaped. The thickness of briquettes is 0.7 ~ 1.2 g/cm3. Allow the briquettes to light and burn for at least 20-30 minutes.

No. Production of briquettes using briquetting machines does not require adding any adhesives, glues. “Pure” material is briquetted – without any additives.

Briquetting Plant requires connected load of 90HP but consumption load is of 75HP.

Yes we can use mixture of different raw material with applicable moisture contents.